Views:1 Author:Site Editor Publish Time: 2019-08-29 Origin:Site
1. Whether to make the correct settings according to the instructions; whether the plug-in is in poor contact.
2. Whether there is wire or wire breakage or off-line; whether the screws and parts are loose or loose.
3. Whether the parts of the equipment are damaged, burnt, abnormally heated, discolored, deformed and worn; whether there is rust or dirt that can cause obstacles.
Automatic weighing machine cleaning method:
Check if the scale body of the automatic weighing machine is normal; if it is inclined, adjust the scale foot so that the weighing table is placed in the center position.
The automatic weighing machine has zero tracking and power-on zero function. It can clear the foreign objects on the weighing pan to ensure that the scale is turned on when there is no wind around. If there is a little weight display after booting, you can press the "clear" button on the keyboard. Return the scale to zero.
Clean the printer (with the device equipped with a printer):
Turn off the power, open the plastic door on the right side of the scale, hold the plum handle on the outside of the printer, and pull the printer out of the scale.
Clean automatic checkweigher scales:
After cutting off the power of the automatic weighing machine, unplug the power cord.Soak the gauze and wring it out, then apply a little neutral cleaning solution (such as alcohol) to clean the weighing pan, display filter and other parts of the scale.